|
|
 |
FEATURES:
Model FD-22A, hand dryer adopts quality special stainless steel cover, the surface treated with sophisticated techniques, wind outlet was specially designed, which can be turned around 360° to dry hand, hair and your face. The appliance adopts specially designed high speed motor to generate fast, strong wind, dries hand fast, and is of strong and endurance, luxury, novelty and fashion. It is suitable for installing in hotels, restaurants, shopping centers, Gym, health center, sauna room, airports, and stations, kind appliance for avoiding cross infections, and keeping sanitary.
|
| The main Tech data: |
|
| Fix Measurement:(mm) |
|
| Installation: |
1. Hand dryer should be fixed by qualified professionals according to the rules of the local country to ensure the normal work of the machine; the safe distance of installation of the appliance please refer to the illustration of the manual.
2. The appliance has an installation graphic board. Unscrew the fixing screw on the side of the air inlet, take down the cover, then draw 4 holes of Φ8mm on the selected wall, put the expansible plastic tubes into the holes, fix the graphic board with attached screws tight, then mount the cover. |
| Fig. of Installation: |
 |
| Attention: |
| Before finishing of the installation of the appliance, connect to the main power to try is forbidden, otherwise it will cause unpleasant result. |
| Usage: |
| The warm air blowing is automatically controlled by sensor. The warm air blows out automatically when hands are presented, and it stops when hands are taken away, and return to ready state. |
| Maintenance and notes: |
1. Do not install the appliance in a room with corrosive air and or electric dust; this appliance does not need any special maintenance, it can work long life provided the fore mentioned notices are observed.
2. Do not chisel and score to damage the cover; do not use chemical solvent to clean, but soft cloth with a few neutral detergent and then clear with wet soft cloth is OK. Attention: pull the plug off before doing cleaning work, and avoid water entering the machine to cause damaging to the appliance. |
| Common trouble shooting data: |
1. If the appliance can still not work normally after above mentioned inspection steps, please stop using it, and contact the local specialty maintenance shop or leave to the professional.
2. Non-professional is not allowed to disassemble the appliance by himself. |
|